Bonjour à tous,
Je possède 2 portables mais ils sont anciens.
Je voudrais savoir si je peux en utiliser un avec l'interface diagbox.
Voici leurs spécifications :
Computer: ASUS K52F
CPU: Intel Pentium P6200 (Arrandale SV, K0)
2133 MHz (16.00x133.3) @ 931 MHz (7.00x133.0)
Motherboard: ASUS K52F
BIOS: K52F.215, 03/09/2011
Chipset: Intel HM55 (IbexPeak-M DH)
Memory: 4096 MBytes @ 532 MHz, 7-7-7-20
- 4096 MB PC10600 DDR3 SDRAM - SK Hynix HMT351S6BFR8C-H9
Graphics: Intel Auburndale/Arrandale Processor - Integrated Graphics Controller [K0] [ASUS]
Intel HD Graphics, 1759426 KB
Drive: ST9640320AS, 625.1 GB, Serial ATA 3Gb/s
Drive: TSSTcorp CDDVDW TS-L633F, DVD+R DL
Sound: Intel 5 Series/34x0 Chipset PCH - High Definition Audio Controller [B3]
Network: Atheros AR9285 Wireless Network Adapter [AzureWave]
Network: JMicron Technology JMC250 PCI-E Gigabit Ethernet Adapter
OS: Microsoft Windows 7 Home Premium (x64) Build 7601
Et:
Type de système ACPI x64-based PC (Mobile)
Système d'exploitation Microsoft Windows 7 Home Premium
Service Pack du système [ TRIAL VERSION ]
Internet Explorer 8.0.7600.16385 (IE 8.0 - Windows 7)
DirectX DirectX 11.0
Nom du système CHRIS-PC
Nom de l'utilisateur Chris
Domaine de connexion [ TRIAL VERSION ]
Date / Heure 2023-11-14 / 10:56
Carte mère:
Type de processeur Mobile DualCore AMD C-50, 1000 MHz (10 x 100)
Nom de la carte mère Packard Bell EasyNote TK13BZ
Chipset de la carte mère AMD Hudson-1, AMD K14
Mémoire système [ TRIAL VERSION ]
DIMM1: Nanya NT1GC64BH4B0PS-CG 1 Go DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)
DIMM2: SK hynix HMT325S6BFR8C-H9 [ TRIAL VERSION ]
Type de Bios Insyde (03/07/2011)
Moniteur:
Carte vidéo AMD Radeon HD 6250 Graphics (256 Mo)
Carte vidéo AMD Radeon HD 6250 Graphics (256 Mo)
Accélérateur 3D AMD Radeon HD 6250 (Wrestler)
Moniteur AU Optronics B156XW02 V6 [15.6" LCD]
Multimédia:
Carte audio ATI Radeon HDMI @ AMD K14 - High Definition Audio Controller
Carte audio Conexant Cx20584 @ ATI Hudson-1 FCH - High Definition Audio Controller
Stockage:
Contrôleur IDE Contrôleur Serial ATA standard AHCI 1.0
Disque dur WDC WD3200BPVT-22ZEST0 ATA Device (320 Go, 5400 RPM, SATA-II)
Lecteur optique Slimtype DVD A DS8A5SH ATA Device (DVD+R9:6x, DVD-R9:6x, DVD+RW:8x/8x, DVD-RW:8x/6x, DVD-RAM:5x, DVD-ROM:8x, CD:24x/24x/24x DVD+RW/DVD-RW/DVD-RAM)
État des disques durs SMART OK
Partitions:
C: (NTFS) [ TRIAL VERSION ]
D: (NTFS) 140.7 Go (108.5 Go libre)
Taille totale [ TRIAL VERSION
Merci d'avance pour votre aide.
Bonne journée.
Mon pc portable est-il suffisant ?
- chrisia
- Messages : 8
- Inscription : sam. oct. 07, 2023 11:51 am
- Localisation : 34
- chrisia
- Messages : 8
- Inscription : sam. oct. 07, 2023 11:51 am
- Localisation : 34
Re: Mon pc portable est-il suffisant ?
Je me réponds :
Les 2 PC sont trop vieux/faibles et Diagbox ne fonctionne pas.
Les 2 PC sont trop vieux/faibles et Diagbox ne fonctionne pas.